{"product_id":"retro-ford-fpv-fg-fgx-falcon-illuminated-switch-assembly-controls-oem-style-plug-and-play-upgrade","title":"Retro Ford\/FPV FG FGX Falcon Illuminated Switch Assembly Controls – OEM Style Plug and Play Upgrade","description":"\u003cp\u003eRetro Ford\/FPV FG FGX Falcon Illuminated Switch Assembly Controls – OEM Style Plug and Play Upgrade\u003c\/p\u003e\n\u003cp\u003ePlease note: All controls come with the Voice button as the MK2 model. This will not affect any other controls if you have a MK1 and will still work as normal.\u003c\/p\u003e\n\u003cp\u003eDirect plug and play replacement for the factory buttons, no wiring or splicing required. Uses a smart voltage sensing micro circuit so the backlighting only runs when the alternator is charging.\u003c\/p\u003e\n\u003cp\u003eThey plug straight into the factory clock spring and retain all existing functions including audio, phone and cruise control, There is no cutting, soldering or splicing of any wiring.\u003c\/p\u003e\n\u003cp\u003eThe backlighting switches on automatically when the alternator reaches charging voltage and switches off when the engine is off and voltage drops. This keeps the system simple and avoids any illegal wiring modifications. The controls are built to full OEM spec and match the original shape and feel so they look like they came from the factory. The only visual change is the illumination, since the original FG controls do not light up at all.\u003c\/p\u003e\n\u003cp\u003eIf you have a low battery or voltage issue, these will not illuminate or could flash which is a sign of not enough voltage to the controls.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand new never used\u003c\/li\u003e\n\u003cli\u003eIlluminated white LED\u003c\/li\u003e\n\u003cli\u003eControls only – steering wheel \u0026amp; Air Bag not included. Photo for reference only.\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play to factory harness, no modifications required\u003c\/li\u003e\n\u003cli\u003eAvailable in (Gloss Black, Matte Black \u0026amp; Silver)\u003c\/li\u003e\n\u003cli\u003eSuits all FG and FGX Falcon models\u003cbr\u003eFits XT, XR6, XR8, FPV, G6E and variants\u003c\/li\u003e\n\u003cli\u003eEstimated install time around 30 minutes\u003c\/li\u003e\n\u003cli\u003e12 months warranty against manufacturing defects.\u003c\/li\u003e\n\u003cli\u003eNot compatible with BA or BF Falcons\u003c\/li\u003e\n\u003cli\u003eWhen pressing the horn the illumination will turn off and turn back on, this is due to them using the horn power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Overview\u003c\/strong\u003e\u003cbr\u003e1. Disconnect the battery before removing the airbag or steering wheel.\u003cbr\u003e2. Remove the airbag and disconnect the airbag plugs.\u003cbr\u003e3. Remove the steering wheel and mark alignment.\u003cbr\u003e4. Remove original controls using the two Torx screws on each side.\u003cbr\u003e5. Install new controls, plug in and secure.\u003cbr\u003e6. Refit steering wheel and airbag with wiring routed neatly.\u003cbr\u003e7. Reconnect battery and test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ And Troubleshooting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e– Buttons not responding\u003cbr\u003eCheck plugs are fully seated and no pins are bent. Ensure vehicle is FG FGX and not BA BF.\u003c\/p\u003e\n\u003cp\u003e– Backlight not working\u003cbr\u003eCheck the ground wire behind the steering wheel. Confirm alternator is charging.\u003c\/p\u003e\n\u003cp\u003e– Lights flashing\u003cbr\u003eIndicates low or unstable voltage. FG and FGX are voltage sensitive. Check battery and\u003cbr\u003ealternator health.\u003c\/p\u003e\n\u003cp\u003e– Airbag will not sit correctly\u003cbr\u003eEnsure wiring is routed exactly as factory. Compare with a photo taken before disassembly.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003ePlease read ALL of the following BEFORE making your purchase\u003c\/strong\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003ePlease \u003cstrong\u003eDO NOT \u003c\/strong\u003eattempt to install this by yourself unless you have been properly trained\/qualified in the installation and maintenance of car steering wheels and airbag systems.\u003c\/p\u003e\n\u003cp\u003eIncorrect installation can lead to steering wheel and airbag failure which can cause an accident resulting in serious personal injury or death to yourself and\/or others.\u003c\/p\u003e","brand":"RETRO AUTOTEK","offers":[{"title":"Silver","offer_id":50531225174213,"sku":"FGCTROL-SIL","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Matte Black","offer_id":50531225206981,"sku":"FGCTROL-MBLK","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Gloss Black","offer_id":50531225239749,"sku":"FGCTROL-GBLK","price":349.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0802\/3064\/5957\/files\/DSC03589-scaled.jpg?v=1790232853","url":"https:\/\/www.dscworks.com.au\/products\/retro-ford-fpv-fg-fgx-falcon-illuminated-switch-assembly-controls-oem-style-plug-and-play-upgrade","provider":"DSC WORKS","version":"1.0","type":"link"}